Pearl Izumi Summit AmFIB Pants

• ELITE AmFIB® Softshell fabric offers wind and water protection
• Thermal Fleece fabric with water shedding PI Dry® technology on back of knees
• PI Dry®® technology for permanent water-shedding performance
• Two zippered Trail Access pockets keep necessities easily accessible
• External hook-and-loop waist adjustments provide a secure, sag-free fit with less bulk
• PLEASE NOTE: This product runs large. We recommend sizing down from your normal preferred size

Fabric:

Main Body: 89% recycled polyester, 11% elastane Back Knee: 56% recycled nylon, 30% polyester, 14% LYCRA® elastane Lower Leg: 100% polyester Other: 100% polyester Made in Vietnam

Care:

USE SIMPLE DETERGENTS WITH NO ADDITIVES Never use detergents with fabric softeners, perfumes or any additive type product. The general rule of thumb is the simpler the better. Many detergents with additives leave "surfactants" behind on a fabric's fibers that inhibit the technical performance. Typically the best detergents to use will have "Clear" or "Free" in their names. Don't pour the detergent directly onto the clothing, put it in the washer first, when you start the water. If something is not functionally working, but is not dirty, try rinsing it twice in warm to hot water. This will help get rid of the harmful surfactants. READ THE CONTENT CARE LABEL: On the inside of your garment, or on the hangcard, there are instructions for the care of that individual piece. On garments this will be on a side seam or back seam label. Follow those directions. On finer fabrics, use a "Gentle" cycle. Close all zippers, attach "hook and loop" closures on gloves YOU CAN USE THE DRYER, CAREFULLY: If you use a dryer be sure to use a lower / warm heat setting (Do NOT use a commercial dryer or a "Hot" setting). This will often restore the fabric and help the water and wind repellent qualities. If in doubt, hang the clothing to dry